FingerTec Face ID 2 (FEM 600) Manual - Manual (Page 25)

2 CONTENTS
10 • CALIBRATION
Checking the Keyboard
Keyboard Test is for you to check the condition of the key-
board. Menu > Auto Test icon > Keyboard Test
Inspection on the Optical Scanner
To determine the condition of the fingerprint optical scan-
ner you need to run fingerprint test. Once you go into the
Test Fingerprint, Face ID will display a white square on the
screen. Place your finger on the scanner. If you can see
your fingerprint on the white square, the optical scanner
works fine. Otherwise, kindly send your Face ID for check-
ing. Menu > Auto Test icon > Test Fingerprint
Checking the Infrared Camera
To know the condition of the infrared face scanner, you
need to run face test. Face ID will display a square in the
middle of the screen; you have to look into the camera. If
you can see your image in the square, the camera is work-
ing fine. Otherwise, kindly send your Face ID for checking.
Menu > Auto Test icon > Test Face
Is the Time Accurate?
Time is an essence in Face ID and it can’t be compromised.
The Test Time will display date, time, 0 (s): 0 (ms)
Click the screen to start the test. The 0 (s): 0 (ms) will start
to run and every 10ms change the second to 1. If it doesn’t
run well, kindly send your Face ID for checking. Menu >
Auto Test icon > Test Time
Calibrating Screen Sensitivity to
Default Level
Menu > Calibration
The screen will display five dots, one at a time in all cor-
ners of the screen and one at the center. You need to
touch the center of the dot for the system to calibrate
the screen automatically. When the process is done, the
screen will return to the main menu.