FingerTec TA100 DIY - Manual (Page 42)

38
Welcome Check-In
09:00
01.01.09
Report
Report
DwnLoad Attlog
DwnLoad User
UpLoad User
1
2
3
Plug USB pen drive to
the terminal.
MENU
Press & Hold
Press 3 times
OK
Press Once
Press 5 times
OK
Press Once
Wait until process is
completed.
OK
Press Once
ESC
Press twice to return
to the main menu.
Unplug the USB pen drive.
4
Copy Data Suc
ESC OK
Report
DwnLoad Attlog
DwnLoad User
UpLoad User
5
To upload users into TA100 DIY, follow steps:
TO DOWNLOAD/UPLOAD ATTENDANCE DATA
(Skip if only one unit of TA100DIY was instal)
If multiple TA100 DIY terminals were installed in a same working environment, users can re-
port attendance at any terminals. Under this scenario, the attendance data in each terminal
might not be complete and this could affect the quality of the reports.
It is advisable to download attendance data from all terminals into a USB pen drive. All of
these attendance data then will be uploaded into a TA100 DIY to centralize the attendance
data. Now you can prepare complete reports of all users without any doubt.