FingerTec TA100 DIY - Manual (Page 18)

14
Place the enrolled finger
properly on the finger-
print sensor.
Wait a second before
removing the finger from
the fingerprint sensor.
Welcome Check-In
09:00
01.01.09
FP Verify
User ID 00001
Verifi ed
FP Verify
Please Try Agn.
1
2
3
4 FP Verify
Remove fi nger
Reader verifies that the
User ID is 00001.
If a finger failed to be
verified by the reader, it
will prompt the user to try
again.
12
13
14
15
16
Input
OK ESC
New User
Name: Mary
Finger 2
Dept NO
Save ?
000000002
ESC OK(Save)
User Mng
Name User
Viewing User
Dept Mng
Input
Mary
OK ESC
Input the names of
Administrator.
Please refer to page 6
for T9 input method.
OK
Press once to
save the name.
ESC
Press Once
OK
Press once to
save settings
ESC
Press twice to
return to the main
menu.
* Please ignore this step if name was not
required in the report. If it was mandatory,
please continue.
Repeat the above steps to enroll more users into the reader.
FINGERPRINT VERIFICATION
Reader supports 2 types of fingerprint verification method. User can choose either method
to verify his fingerprint at the reader. 2 types of fingerprint verification methods are:
• 1 to Many (1:N) fingerprint matching
• 1 to 1 (1:1) fingerprint matching
1 TO MANY (1:N) FINGERPRINT MATCHING