EVCO c-pro micro - Manual (Page 13)

C-PRO MICRO HARDWARE MANUAL
Page 13
3.4 General characteristics
Safety reference standards EN60730-1
Scope of the device A programmable electronic controller for
refrigeration, ventilation and air
conditioning applications
Storage conditions -10T70°C Non-condensing RU<80%
Operational conditions 0T50°C Non-condensing RU<80%
Electric shock protection class Add-on control device; assumes the
classification of the equipment into
which it is integrated
Disconnection type Reduced interruption (relay breakers)
PTI of the insulation materials >=250 V
Case Mounting on omega rail
Action type 1C
Pollution Normal
Software class A
Insulated parts electrical stress period Long
Front panel protection classification IP00 for the open versions; IP 40
otherwise
3.5 Technical characteristics
Low voltage signal connections 16 way Mini-Fit
Power connector Phoenix pull-out terminal board; screw
terminals for the open versions
Cable diameter > 0.75 mm
2
Connection for connecting the EVCO powered serial
port to the remote keypad and/or remote I/O expansion
card Phoenix pull-out terminal board; screw
terminals for the open versions
Connection for parameter key, TTL serial output for
RS485 module, Flash programming interface 6 way AMP micro-match
Connection for D/A output Phoenix pull-out terminal board; screw
terminals for the open versions
16 WAY MINI-FIT CONNECTOR SPECIFICATIONS
SUPPLIER CONNECTOR CODE CONTACT CODE
Please note:
use the special tool for crimping
CVILUX CP-01 116010 (V2)
CP-01 116020 (V0) CP-01 1000102 (AWG16÷24)
SELECOM 6137R16WO (V2) 6137TR1 (AWG16÷20)
6137TR2 (AWG22÷26)
JUSCOM 1090-557-162 (V2) 1150-156-012 (AWG18÷22)
1150-156-002 (AWG22÷26)
CONEXCON 6740-1161 (V2)
6740-1160 (V0) 6744-2000 (AWG18÷22)
MOLEX 39-01-2160 (V2)
39-01-2165 (V0)
39-00-0038 (AWG18÷24)
39-00-0046 (AWG22ч28)