EVCO c-pro micro - Manual (Page 11)

C-PRO MICRO HARDWARE MANUAL
Page 11
Connector 5: Connector for remote keypad and I/O expansion unit (CAN)
Conn. Abbrev. Description
C5-1 + Connector for the serial CAN+ connection
C5-2 GND Ground reference connection
C5-3 - Connector for the serial CAN- Connection
3.3 C-PRO MICRO dimensions/installation
The mechanical dimensions for the C-PRO MICRO are given below; the measurements are in mm (in).
Recommendations for installation:
- ensure that the operating conditions (operating temperature, humidity, etc.) are within the limits
indicated in the technical data sheets
- do not install the device near to any sources of heat (heating elements, hot air conduits, etc.),
equipment containing powerful magnets (large diffusers, etc.), areas affected by direct sunlight, rain,
humidity, excessive dust, mechanical vibration or shock
- in compliance with safety regulations, the device must be installed correctly, and in such a way as to
protect against any contact with electrical parts; all safety devices must be fixed so that they cannot be
removed without the use of tools.