EVCO c-pro mega - Manual (Page 14)

C-PRO MEGA HARDWARE MANUAL
Page 14
The following table shows the available inputs and outputs on c-pro Mega :
Lower board 12 VDC + 12 VDC power supply version
Conn.
Letter
code
Description
C1-1 VCC main card power supply (+13Vdc)
C1-2 GND Main power supply reference
JA-1 VDC power supply for active sensors (*1)
JA-2 AI 1 universal analogic input 1 (NTC, PTC, 0..5V, 0..10V, 0..20 mA, 4..20 mA)
JA-3 GND common terminal for analogic inputs
JB-1 VDC power supply for active sensors (*1)
JB-2 AI 2 universal analogic input 2 (NTC, PTC, 0..5V, 0..10V, 0..20 mA, 4..20 mA)
JB-3 GND common terminal for analogic inputs
JC-1 VDC power supply for active sensors (*1)
JC-2 AI 3 analogic input 3, configurable (NTC, 0..20 mA, 4..20 mA)
JC-3 AI 4 analogic input 4, configurable (NTC, 0..20 mA, 4..20 mA)
JC-4 GND common terminal for analogic inputs
JD-1 VDC power supply for active sensors (*1)
JD-2 AI 5 Analogic input 5, configurable (NTC, 0..20 mA, 4..20 mA)
JD-3 AI 6 Analogic input 6, configurable (NTC, 0..20 mA, 4..20 mA)
JD-4 AI 7 Analogic input 7, configurable (NTC, 0..20 mA, 4..20 mA)
JD-5 AI 8 Analogic input 8, configurable (NTC, 0..20 mA, 4..20 mA)
JD-6 GND common terminal for analogic inputs
JE-1 COM common terminal for digital inputs
JE-2 DI 1 digital input no. 1 Vac/Vdc
JE-3 DI 2 digital input no. 2 Vac/Vdc
JE-4 COM common terminal for digital inputs
JF-1 COM common terminal for digital inputs
JF-2 DI 3 digital input no. 3 Vac/Vdc
JF-3 DI 4 digital input no. 4 Vac/Vdc
JF-4 DI 5 digital input no. 5 Vac/Vdc
JF-5 DI 6 digital input no. 6 Vac/Vdc
JF-6 COM common terminal for digital inputs
JG-1 COM common terminal for digital inputs
JG-2 DI 7 digital input no. 7 Vac/Vdc
JG-3 DI 8 digital input no. 8 Vac/Vdc
JG-4 DI 9 digital input no. 9 Vac/Vdc
JG-5 DI 10 digital input no. 10 Vac/Vdc
JG-6 COM common terminal for digital inputs
YA-1 VDC 12 Vdc power supply output to a remote use interface
YA-2 CAN1+ CAN+ output to the Local-CAN
YA-3 CAN1- CAN- output to the Local-CAN
YA-4 GND GND power supply output to a remote use interface
JH-1 NC 1 normally closed contact relay no. 1
JH-2 COM 1 common relay no. 1
JH-3 NO 1 normally open contact relay no. 1
JI-1 NC 2 normally closed contact relay no. 2
JI-2 COM 2 common elay no. 2
JI-3 NO 2 normally open contact relay no. 2
JK-1 COM 3 common relay no. 3
JK-2 NO 3 normally open contact relay no. 3
JK-3 COM 4 common relay no. 4
JK-4 NO 4 normally open contact relay no. 4
JK-5 COM 5 common relay no. 5