E-MU Tracker Pre USB 2.0 - Manual (Page 30)

Tutorials
30 E-MU Systems
6. If your input signal is either too weak or too strong, adjust the input level
control on the Tracker Pre.
7. Optional Step - Metronome: From the Options Menu, select Project. Select
the Metronome tab. Next select “Use Audio Metronome”. Click OK. Make
sure the Metronome During Record button in the Transport Bar is On.
Record a Track
8. Press Record on the Sonar 6 LE Transport control and start playing.
9. Press Stop when you’re finished recording the first track.
10. Press Play on the Sonar 6 LE Transport to play back your track.
11. If you want to dump the track and start over, Right-click over the waveform
display in the track and choose Delete.
Create another Audio Track
TIP . . .
You can create a new track
by selecting Clone, from the
Track menu. This handy
feature duplicates the
currently selected track
complete with input/output
routings.
12. From the Insert Menu, select Audio Track. Track 3 appears in the Project
window.
Record another Track
13. Select Track 3 and click the Restore Strip Size button to expose the input
and output routing.
14. Set the Input source for the track. Click on the little triangle on the right
side of the track Input box.
15. Disable record for Track 1 by clicking on the Track Record button Off.
16. Enable recording for Track 3 by clicking on the Track Record button On.
17. Press the transport Record button and you’re recording.
Hot Tip: A quick way to record additional tracks using the same input is to simply
drag the Part (audio region) you just recorded up or down to another audio track
in the Sonar Project Window, then just hit Record again and go. (Choose Blend
Old and New when asked in the Drag & Drop Options.)
Save your Project
18. Choose Save As… from the Sonar 6 LE File menu to save your project. Choose
a name and location that will make the project easy to find later.
Record Play Stop
Return-To-Zero