Drawmer M500 Dynamics Processor - Manual (Page 50)

M500 OPERATORS MANUAL Ch 7 - 1
CHAPTER 7
M500 MIDI IMPLEMENTATION CHART
FUNCTION TRANSMITTED RECOGNISED REMARKS
Basic Channel 1 - 16 1 - 16, & Omni 'Off' option disables MIDI
Mode
Default Mode 3 Mode 3 Mode 2 & 4 are not applicable
Messages No No
Altered No No
Note Number 1 - 127 1 - 127
Velocity Note On Yes No GATE Peak Level relates to velocity
Velocity Note Off No No
Aftertouch Keys No No
Channel Pressure No No
Pitch Bender No No
Control Changes
#6 Yes Yes See MIDI MODE, rotary value
#7 No Yes When MIDI MASTER VOL is enabled
#64 No Yes GATE ReTrig Time, GATE envelope plays
#65-95 No Yes FADE Effect if matching number
#70-94 No Yes MIDI MODE front panel number
#96,97 Yes Yes MIDI MODE data inc / dec
sustained or normally
Program Change 0 - 127 0 - 127 See MIDI or PATCH CONTROL CHANGES Yes
System Exclusive Yes Yes See System Exclusive chart page
System Common
Song Pos No No
Song Num No No
Tune Req No No
System Real Time
Clock No Yes See MIDI Trig Time
Start No Yes See MIDI Trig Time and FADER Switch
Continue No Yes See MIDI Trig Time and FADER Switch
Stop No Yes See MIDI Trig Time and FADER Switch
Aux Messages
Local On/Off No No
All Notes Off No Yes Closes any open GATE or PAN Effect
Active Sense No No
Reset No No