Comtrol ES8508 Series User Guide - Manual (Page 16)

16 - Reset Button RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Hardware Installation
Reset Button
The ES8508has a reset button that you can use to reboot the ES8508 or reset the configuration to the factory
default.
The Reset button is located on the front panel of the ES8508.
Reset Button Description
Depress 5 Seconds This reboots the ES8508 without changing the configuration.
Depress > 10
Seconds This loads the factory default configuration values into the
ES8508 including the IP address.
10/100BASE-TX
Fast Ethernet
Ports 1 - 6
LEDs
Refer to LED Descriptions on
Page 14
RS-232 Console Port
Reset Button
ES8508F/ES8508F-XT
100BASE-FX
Fast Ethernet
Ports 7 - 8