Event selection – Comtrol ES8508 Series User Guide User Manual
Page 118
118 - Event Selection
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Configuration Using the Web Interface
Event Selection
Event Types can be divided into two basic groups: System Events and Port Events. System Events are related
to the overall function of the switch, whereas Port Events are related to the activity of specific ports.
System Event
Warning is sent when….
Device Cold Start
Power is cut off and then reconnected.
Device Warm Start
Reboot the device by CLI or web user interface.
Power 1 Failure
Select this if you want the ES8508 to send notification of a PW1 failure.
Power 2 Failure
Select this if you want the ES8508 to send notification of a PW2 failure.
Authentication failure
An incorrect password or SNMP Community String is entered.
Time Synchronize
Failure
Accessing the NTP Server is failing.
Fault Relay
Fault Relay has occurred.
DI1 Change
The Digital Input#1 status has changed.
DI2 Change
The Digital Input#2 status has changed.
Ring Event
A ring event has occurred.
Port Event
Warning is sent when…..
Link-Up
The port is connected to another device.
Link-Down
The port is disconnected. For example, the cable is pulled out or the opposing
devices is down.
Both
The link status changed.
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if you want to maintain these
settings if the ES8508 is powered off.