Comtrol ES8508 Series User Guide - Manual (Page 128)

128 - Device Front Panel RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Configuration Using the Web Interface
Device Front Panel
The Device Front Panel allows you to see the LED status of the ES8508.
Note: There is not a CLI command for this feature. If you can view the physical LEDs, you can use the LED
Descriptions on Page 14, which provide detailed LED information.
LED Name LED On/Link Up LED Off/Link Down
Sys (System) Green: System operational Black: System not ready
PWR 1
PWR 2
Green: Power White: Not powered
DO (Digital Output) Green: DO activated White: DO not activated
DI (Digital Input) Green: DI activated White: DI not activated
R.S. (Ring Redundancy
Manager)
Green: Ring state is normal Black: Ring feature not enabled
LNK/ACT Green: Link active Black: Not connected
Ports 1- 8 Green: Link active Black: Not connected