Toshiba MA-1050-100 Series User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
These locks are used to identify which clerk
is operating the register.-
Clerk Keys (CLl, CL2, CL3, CL4)
Each clerk should keep his/her clerk key. The register
will not operate in the REG, MGR, or
mode unless
one of these keys is inserted and set to the corre
sponding position on the Clerk Locks. Each of the
keys may be inserted and pulled out in the neutral
position marked with
(point).
This lock is provided to read or reset the
accumulated sales totals not on the daily
but on weekly or monthly basis.
GTX Position:
This position allows to read the accumulated
totals.
The GTX Key and GTZ Key can access this posi
tion.
GTZ Position:
This position allows to read and reset the
accumulated totals.
The GTZ Key only can access this position.
NOTE: When the GT Lock is turned to either
the GTX or GTZ position, the Mode Lock,
and Clerk Lock positions will be dis
regarded wherever they may be.
_ 3 -