Toshiba MA-1050-100 Series User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/671491/18/background.png)
This key is used to record all cash paid on transactions, and will
be able to finalize a sale operation. Usually the key is programmed
to function as both amount tendered and cash total key. However,
the key may be programmed to operate with enforced tendering only
or as a cash total key only.
AMOUNT TENDERED FUNCTION
I AT/TLI Amount Tendered / Cash Total Key
After the ITXBL TL I key has been depressed, enter the amount
tendered by the customer in payment of the sale, and then depress
the . IAT/TLI key. The change is automatically computed, displayed
and printed.
If the amount tendered is smal ler than the sale total, it prints
the amount tendered on the receipt with the balance still due
displayed, but the drawer is not yet opened. In this case, ask
the customer for additional payment in cash and repeat the same
tendering operation, or use another media key (|CHK TEND| or |Chg|)
if the balance due is processed as a sale in that media.
TOTAL KEY FUNCTION
To obtain the total and finalize a cash sale, depress the |AT/TL|
key
only.
The
sale
is
finalized
with
the
total
printed
and
displayed, and the drawer opens.
NOTE: 1. If the I AT/TL I key has been programmed to function as
"Tendered" key only and the sale total is "0" or negative,
no amount tendered can be entered. In this case, the
(
at
/ Tl7| key will function as the "Total" key, so just
depress the |AT/TL| key to obtain the total and finalize
the sale.
2. If the "j TXBL TL | Compulsory" option has been selected
in the system option, the
I
TXBL TL
1
key depression for
obtaining the sale total is required before finalizing
any sale.
The i AT/TLI key is also used to finalize received-on-account payment
entries or paid-out amounts.
The sale total will be printed on the receipt in double-sized
characters if it is within a A-digit value.
CHK TND| Check Tendered Key (Media 1 Key)
This key is used to cash a check when the register is outside a sale,
or to finalize the transaction as a check payment.
CHECK CASHING
When the register is outside a sale, enter the check amount and
depress the | CHK Tt^ key. A receipt is issued and the drawer is
opened to enable exchange. However, this cashing function may be
prohibited if so programmed in the system option.
- lA -