Toshiba MA-1050-100 Series - Manual (Page 53)

4. When only the name is programmed or changed but not the
status, STEP (A) may be skipped in the above operation.
Likewise, when only the status is programmed or changed
but not the name, STEP (B) may be skipped.
5. Among ITXl/MI (|TX/M|), and |TX2/M|, depress the key(s)
for the required status change(s) for each department.
The IRTN MDSE I is depressed to set or reset the negative
department status.
6. Depressing any of the three keys above, the related status
reverses. For example, depressing the. 1TX/M j reverses a
non-taxable department to a taxable, or taxable to non-
taxable. Each department status is read by the number
indicated in the AMOUNT portion of the display when each
department key is depressed in the above operation. The
numbers and their respective statuses are:
0: Non-taxable
1: Tax 1 taxable only
2: Tax 2 taxable only
3: Tax 1 and Tax 2
both taxable
"” Lamp lit: negative
Lamp unlit:
positive
(This status is reversed
by the IRTN MDSE] key.)
Watching the number, adjust the status by depressing these
keys. See the examples below:
STATUS NUMBER
BEFORE CHANGE
KEY-IN FOR CHANGE
PRIOR TO I DEPT I KEY
ITXl/Ml
^ NEW NUMBER AND
^‘ status OBTAINED
1(Taxi only)
0 ITXI/MlITX2/M1 3(Taxl & Tax2)
0 -» 1 tx T/ m I -V 2(Tax2 only)
etc.
1 ITXI/Mi 0(Non-taxable)
1 -> !TX2/Mi 3(Taxl & Tax2)
1 -> 1TXl/Ml|TX2/M| 2(Tax2 only)
etc.
2 !TX2/MI 0( Non-taxab Le)
2 ITXI/Ml 3(Taxl & Tax2)
3 1TXl/Ml 2(Tax2 only)
etc.
- 49 -