Mc-55 mobile microphone (8 pin), Mc-48 autopatch up/down hand microphone (8 pin), Ac-10 ac adaptor for cd-i 0 – Kenwood TM-3530A User Manual
Page 43: Pg-2n dc power cable, Pg-3a 15a dc line noise filter, Mc-42s up/down hand microphone, Mb-10 mobile mount
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MC-55 Mobile microphone (8 pin)
CD-10 Call sign display
The MC-55 provides UP/DOWN switches, LED display
for switching transmit or receive, adjustable microphone
gain, automatic receive returning circuit (approx. 5 min
utes) and many functions.
The CD-10 stores the call sign of the calling station in its
memory and displays it on an LCD display. Call signs of
up to 20 of the most recently calling stations are stored.
Allowing the operator to quickly check for and return any
call.
MC-55 Electret condenser microphone
■ MC-48 Autopatch UP/DOWN hand
microphone (8 pin)
The MC-48 is 16-key auto-patch UP/DOWN micro
phones with PTT switch. Encodes 16 autopatch tones.
UP/DOWN switches provide step frequency change, or
initiate band scan in the appropriate direction, if held de
pressed momentarily.
CD-10
AC-10 AC adaptor for CD-I 0
MC-48
PG-2N DC power cable
■ PG-3A 15A DC line noise filter
May
be
used
with
the
TM-3530A/2550A/2550E/
2530A to suppress ignition noise. (Not for use with
TM-2570A.)
■ MC-42S Up/Down hand microphone
MC-42S is handy dynamic microphone with PTT switch
and UP/DWN switches.
■ SW-200A/200B SWR/POWER meter
(supplied with a coupler)
SW-200A supplied with SWC-1. SW-200B supplied
with SWC-2. Selectable Peak-reading/RMS. SWR/
POWER meters cover 1.8 ~ 150 MHz (SW-200A), 140
~ 450 MHz (SW-200B) in range of 0 ~ 20/200W, full
scale for base station use.
MC-42S
■ MB-10 Mobile mount
The mobile mount MB-10 allows easy installation and re
moval of the TM-3530A/2570A/2550A/2550E/2530A.
SW-200A/200B
MB-10
43