4-5. priority channel select, 5. scan, 5-1. memory scan from the keyboard – Kenwood TM-3530A User Manual
Page 17: 5. scan 7, 5-1. memory scan from the keyboard 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4-4-5. Priority channel select
Any one of the 23 memory channels can be selected as
the priority channel.
0 Depress the AL switch.
(D Select the memory channel to be the priority channel
using the MEMORY CHANNEL selector.
(D Press the | PS| key to enter the selection.
4-5. SCAN
SCAN operations are divided into keyboard scan,
memory scan and priority channel scan. For SCAN oper
ation, the squelch control should be advanced to the
threshold point. (See page 11 for squelch control.)
First, select either TO (Time Operated) hold or CO (Carrier
Operated) hold with the SCAN switch.
The TO scan duration may be set thru the use of an inter
nal potentiometer.
For details, see page 34.
4-5-1. Memory scan from the keyboard
© Press the M.CH switch to select memory mode. (The
MEMORY CHANNEL selector will light.)
® Press the [SC| key to initiate scanning.
Scan will begin from the current displayed channel ad
vancing, toward the higher numbered channels.
17