2. storing a telephone channel in normal memory, 7-3. automatic telephone number transmission – Kenwood TM-3530A User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^-
1
-
2
.
Storing a telephone channel in normal
memory
© Select the desired memory channel with the MEM
ORY CHANNEL selector.
© Press the PHONE switch.
© Select the desired telephone channel number with the
MEMORY CHANNEL selector.
(When the key is pressed, " R - - " will be dis
played, erasing any previously stored telephone chan
nel number, and turning off the telephone indicator
If you wish to review the contents of the tele
phone channel press the
I
PS
I
key as previously de
scribed.)
® Press the [
m
] key.
(Pressing the [
m
] key stores the telephone channel in
formation in the selected memory channel. Either the
key mode or the memory mode may be used for this
operation.)
® Press the PHONE switch to return to the normal fre
quency display.
Any telephone number channel may be entered into any
memory channel location using the above procedures.
4-7-3. Automatic telephone number transmis
sion
© Select the desired telephone number channel using
the MEMORY CHANNEL selector.
© Press the PTT switch.
© Press the PHONE switch to initiate transmission of
the telephone number.
(Pressing the PHONE switch with the telephone indi
cator off will cause an alarm to sound, signifying an
error in operation.
* Conventional 16-key autopatch operation is also possi
ble, as is a combination of automatic dialing and con
ventional dialing. Simply press and hold the PTT bar
when conventional operation is desired.
22