Brother INTELLIFAX 900 - Manual (Page 69)

■li
COSNECTIO\
FOR YOUR INFORMATION
Sequence of TAD Mode Reception
------ "
itóllili
Incoming Call
The call is picked up
by the external TAD.
(Recommended short
ring delay such as 1
ring or 2 rings.)
Fax reception is
automatical iy
activated by the
CNG Fax Tone. Auto dial
fax call
The external TAD
outgoing message
begins (recommended
length of less than
20 seconds).
Manual
fax call
The caller must
press your remote
code to activate
the fax machine.
Voice call
The fax message The caller leaves a
1
1
The fax message is
is received on
paper. voice message on the
external TAD,
The caller
can also
received on paper.
send a fax message.
Telephone Answering Deyice
1. Set the telephone answering device so that it is ready to record incoming telephone
calls.
2 . S e t t h e number of TAD rings to one or two.
3. Try to record the shortest possible message on your telephone answering device
(up to 20 seconds).
Please note that some faxes that are sent manually cannot be received automatically
because some fax machines do not send a fax tone in manual mode.
So you must indicate a remote activation code for the caller to enter. (See page 7-10.)
7-12