Brother INTELLIFAX 900 - Manual (Page 37)

lili
USING THE UNIT AS A TELEPHONE
5. USING THE UNIT AS A TELEPHONE
Your fax machine can be used to make regular telephone calls. You can dial numbers manually,
by pressing the number keys, or by using One-Touch or Speed-Dialing.
Manual Dialing
1. Pick up the handset, or press HOOK.
2. When you hear the dial tone, you can begin dialing by pressing the number keys.
3. If you used HOOK, pick up the handset when the call is answered.
One-Touch Dialing
1. Pick up the handset, or press HOOK.
2. When you hear the dial tone, press the desired One-Touch key.
3. If you used HOOK, pick up the handset when the call is ansvv^ered.
If you try to use a One-T ouch number that has not been registered, you will hear a warning sound
and the display will carry a message reading, “NOT REGISTERED”. The display will return to
normal after 2 seconds.
Speed Dialing
1. Pick up the handset or press HOOK.
2. When you hear the dial tone, press SPD. DIAL and then the two digit Speed-Dial number.
3 . I f y o u used HOOK, pick up the handset when the call is answered.
ipWDUR INFORMATION
Using Keys with the Telephone
- Use PAUSE / REDIAL for putting a pause between numbers.
- Use HOLD to put a call on hold. You can put down the handset without
disconnecting the call. You must pick up the handset to release the call from
HOLD,
- Use# to switch the dialing type from “pulse” to “tone”. This key is also used for push­
button services, such as those offered by banks, credit card companies, or paging
On Hook Dialing
When you make a call using HOOK, you can listen to the other end of the line, but
they can’t hear you unless you pick up the handset. Also, if you press HOOK again
before you pick up the handset, the call will be disconnected.
5-1