Brother INTELLIFAX 900 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6) Place the paper in the
cassette.
Make sure the front right
and left corners of the paper
are under the edge tabs.
Do not place paper above
the maximum height line,
or paper may misfeed.
7) Close the cover on the
cassette.
8} Slide the paper cassette into
the fax machine untill it
locks into place.
»
NOTICE
About the Recording Paper..,
Please use standard copier paper for the recording paper as below :
Width : 216mm (8.5'')
Length; Letter/ Legal size
Weight; 17 lb to 24 lb
About the Cassette...
When you pull the paper cassette, it is necessary to push down the paper plate until
the cassette “clicks” into position before you re-install the cassette to the fax machine.
Otherwise the “REFILL PAPER CASSETTE” will remain on the LCD display. Also,
please do not pull out or re-insert the cassette while the machine is doing a job (for
example, copying, transmitting or receiving), or a paper jam may occur.
4. Connect the handset,
5. Connect the power code.
When you connect the power, your fax machine will automatically print a power failure report,
and the display will show “01/01/1995 00:00”.
NOTICE
1. This fax machine must be grounded using a 3-prong plug.
2. Since the machine is grounded through the power outlet, you can protect yourself
from potentially hazardous electrical conditions on the telephone network by
keeping the power to your fax machine on before you connect it to a telephone line.
1-4