Buttonhole (continued) – Kenmore 15343 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Buttonhole (continued)
Set the stitch selector at
Stop sewing at a right stitch
Sew four (4) to six (6) stitches.
Set the stitch selector at [0 . Sew until you return to the start
mark of the buttonhole. Stop sewing at a right stitch.
t
0
.
Set the stitch selector at UJ . Sew four (4). to; six (6)
stitches. Stop sewing at
a
left stitch.
.
Remove the fabric and place a pin just before the bartack at
each end to prevent cutting bartacks. Cut the opening with
the buttonhole opener.
NOTE: When sewing a buttonhole at the edge of a fabric,
set the sliding buttonhole foot as illustrated and
sew in reverse