Kenmore 15343 - Manual (Page 38)

Needle Threader {Model 15343 exclusive)
a
Raise the needle to its highest position.
Puli down the needle threader knob as far as it
will go.
Turn the knob in the direction of the arrow in the
illustration, then insert Hook into the needle eye.
Lead the thread around Guide and under Hook.
3 Turn the knob in the direction of the arrow in the
illustration, drawing the thread loop through;ihe.
needle.
a Pull the thread through the needie;eye.
The needle threader .can)be used v^/ith a #11 to #16
needle or a blue tipped rieedie. Thread size
50 to 90 should also work well. ;■
Drawing up bobbin^ thread
[T| Raise the presser foot:. Hpid;the needle thread lightly
with your left hand.
Rotate the handwheel counterclockwise, toward you,
for one complete turn. Bring the bobbin thread up by
pulling the needle thread up.
Pull both threads 4” to 6” (10.0 to 15.0 cm) under and
behind the presser foot.
26