Changing presser foot, To remove, Presser foot types – Kenmore 15343 User Manual
Page 24: Zigzag foot, Sliding buttonhole foot, Zipper foot, Hemmer foot, Presser foot lifter
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing Presser Foot
@ Lever
©Groove
©Pin
• To remove
Turn the handwheel toward you to raise the needle to its
highest position. Raise the presser foot.
Press the lever® on the back of the foot holder. The
presser foot will drop off.
• To
attach
Place the presser foot so that the pin @on the foot lines
up directly below the groove ©of the foot holder.
Lower the foot holder to lock the foot in place.
h
Presser Foot Types
• Zigzag foot
Use this foot for both straight and
For: Straight stitch
Topstitching
Basic zigzag
Satin stitching
Monogramming
Applique
Bar tacking
Button se\-.' nq
Overcastingstitch
Multiple zigzag stitch
Blind hem stitch: .T ■.
Lace work :. : :.
zigzr-g St icn ng
(page34)'
(page;.36).....
(page 42)
(page 42)
(pa;ge44)
(page.44)
(page,46); .. :
(page 46);.;
(page 48) "
; : (page 48)
;.; (page 50)
: . (page 50)
Sliding buttonhole foot
Use this foot for manual buttonhole making. It is marked
to help you measure a buttonhole accurately.
For: Buttonhole sewing
(page 54)
' Zipper foot
The edge of the foot guides the zipper and keeps the
seam straight.
For:Zipper sewing
(page 36)
Hemmer foot
This special foot is for sewing a rolled hem. The curl of
the foot helps to form a hem at a constant width.
For: Rolled hem
(page 38)
12