Twin needle stitches (option) – Kenmore 15343 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Twin Needle Stitches (Option)
(T) Stitch selector:
E or F
@ Presser foot:
Zigzag foot
(3) Needle thread tension:
1 to 4
(4) Needle:
Twin needle (optional item)
NOTE: Do not set the stitch pattern selector at A, B, C, D,
G, H, I. J or K. otherwise the needle may hit the needle
plate or presser foot and could possibly break.
®
m
(T) Upper thread guide
(2) Check spring holder
(3) Thread take-up lever
0Twin needle (optional item)
Turn off the power switch. Pull up the additionaJ.spool .pin.
Place a piece of felt on the additional spool, pirr.-IViake: sure
you separate the two strands of thread and sfip one strand
through the needle bar thread guide(- oi-; ri'ie ell ■■¡■■•c vi'ie
other on the right.
Change the needle to a twin needle(5).Thread each needle
from front to back
When you want to shift the fabric to change the (sewing: .: ,
direction, you must.ffrst raise the needl.S:Oui of the fabric.