Kenmore 15343 - Manual (Page 18)

SECTION IL GETTING READY TO SEW
Connecting Machine to Power Supply
(T) Power supply plug
(2) Power switch
(D Outlet
(4) Machine socket
(5) Machine plug
(D Sewing light
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
1. Turn off the power switch (2).
2. Insert the machine plug(D into the machine socket
3. Insert the power supply plug (T)into the outlet (3).
4. Turn the power switch (2) to activate the power and
sewing light®.
Before Using Your Sewing Machine
Before using your sewing machine for the first time, place a
waste fabric under the presserfoot and run the rpa.chine .;. .
with thread for a few minutes. Wipe away :ahy oil which, may.
appear.
For Your Safety
* While in operation, always ke.ep.your eyes; on. the sewing .■
area. Do not touch, any m:ovihg parts, such as the thread-.
take-up lever, haiiipftei or hfeedle. '-i :T k :T . V . ■ ■
* Always turn off tilljpwer switch and.,unplug from the
power supply: ’B;0cQ- ylSgi;
- When leaving thfriliachine unattended
- When attaching ■qiliilpying anypgii
- When cleaning ih#iiisfii|i®5
* Do not place anything on.thei.foot control, when not
sewing, ..
Polarized Plug
This appliance has a polarized plug (one blade wider than
the other). To reduce the risk of an electric shock, this
plug
is intended to fit in a polarized outlet only one way. If the
plug does not fit in the outlet, reverse the plug, if it still does
not fit, contact a qualified electrician to install the proper
outlet. Do not modify the plug in any way.
Foot Controller Model YC-482J orTJC-150 is used with
Sewing Machine Model 385,15243/15343.
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.