Cisco XM Universal Gateways Cisco AS5400XM - Manual (Page 38)

3-8
Cisco AS5400XM Universal Gateway Chassis Installation Guide
OL-6418-02
Chapter 3 Installing the Cisco AS5400XM Universal Gateway
Connecting to the Network
Figure 3-8 Connecting to an RJ-45 Jack
• Use a serial transition cable to connect one of the two synchronous serial ports to a modem or a
CSU/DSU. (See
Figure 3-9 .)
Figure 3-9 Connecting to a CSU/DSU
Note For cable and port pinouts for specific dial feature cards, see Appendix C, “Cabling
Specifications,” in the Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card
Installation Guide.
30847
T1/E1 8 PRI
connector
P1 P2 P3 P4 P5 P6 P7 P0
E1 cable
RJ-45 jack
30846
Serial
transition
cable
CSU/DSU or
other DCE or DTE
Synchronous serial
port (DB-26)
EIA/TIA-232, EIA/TIA-449, EIA/TIA-530A,
EIA/TIA-530, V.35, or X.21 connector
Internet