Carl Goldberg GBGA1064 - Manual (Page 17)

17
3. † Keep the hole in the front of the cowl centered
on the engine.
4. † Screw the cowl to the fuselage using #2 x 5/16
screws.
WINDOWS
1. Collect the following items:
(1) Fuselage
(1) Windshield
(1) Side windows (Right & Left)
2. † Using scissors, cut around the outside of the
windows leaving a 1/8” flange around the
edge.
3. † Keep the two rear windows together but, cut
the front window off by cutting down the mid-
dle of the space between the 1st and 2nd win-
dow.
4. † Glue the windows in using a small amount of
medium CA glue or a canopy glue, on the
flange around the outside of the window.
† Holding or tape the window in place till the
glue hardens.