beautypg.com

AERCO KC Standard to Low NOx Convertion Instructions User Manual

Page 34

background image

34

Figure 29. Analyzer Probe Hole Location

5.2.3 Installing The Differential Regulator Adjustment Tool

1. Remove the cap from the differential pressure regulator (see Figure 30).

2. Place the gasket from the regulator cap onto the regulator adjustment tool.

3. Prior to Installing the tools on the regulator, pull up the tool's screwdriver blade. Then, thread

the tool into the regulator.

4. Engage the tool’s screwdriver blade into the regulator’s adjustment screw slot.

Figure 30. Regulator Adjustment Tool Installation