Introduction, 1. introduction – A&D Weighing HC-3Ki User Manual
Page 5
3
1. INTRODUCTION
1-1. Introduction
Thank you for your Purchase!
This manual describes the functions of your counting scale and how to get the most
out of it. Read this manual carefully before use.
Features
The HC-i counting scales have the following features:
The scales have the high internal resolution for a wider range of counting
applications.
HC-3Ki / 6Ki / 30Ki: 1/600,000
HC-15Ki:
1/750,000
There are the following ways to enter a unit weight (of the sample piece).
The way to weigh a fixed number of samples like 5 pieces, 10 pieces and so on.
The way to weigh the desired number of samples.
The way to store the desired unit weight directly using the 10-key pad.
The way to recall the stored unit weight from ID memory.
The way to send the desired unit weight from a personal computer.
Three UNIT WEIGHT BY LED's will navigate you to enter a unit weight easily.
ACAI (Automatic Counting Accuracy Improvement) supports counting by
recalculating the unit weight when a sample is added. Therefore it is possible to
reduce the counting error.
The scale can show information for piece count, weight, unit weight and
comparator result at the same time.
UP to 99 ID memories can store ID numbers, unit weight, tare weight and comparator
limits.
Comparator function:
Compare a count or weight
Comparator limits can be changed using the 10-key pad.
Comparator relay output is also available using an optional interface.
Accumulation function for counting.
Optional RS-232C interface to communicate with a personal computer and printer
expanding the counting application.
The optional SLA (sealed lead acid) battery is useful for portable operation.