F-09-02 – A&D Weighing HC-3Ki User Manual
Page 38
36
Data Length and Parity
0
3 7 bits, even parity.
1
7 bits, odd parity.
2
8 bits, non parity.
“f-07” and “f-08” are for factory use and should be “0”.
F-09-X
½
key
Operation mode for the
½
key
0
3
Operating as a key to display and/or change comparator
upper and lower limits.
1
Operating as
M-
key to subtract Count data from M+
memory.
2
Operating as a key to toggle the weighing unit between “lb”
and “g”.
Decimal Point and RS-232C Output
0000
3
Decimal point: “
.
”
Header for stable weight data: “ST” R > F > Select the decimal point “ . ” or ” , ” and output format for RS-232C. Set 0 or 1 for each bit. Decimal point: “0” = ” . ” “1” = ” , ” Header: “0” = “ST,+001.2346 kg” “1” = “WT,+001.2346 kg” Acknowledgment: “0” = ” R > F >” “1” = ” “f-10”, “f-11” and “f-12” are for factory use and should be “0”. f-06-05 f-09-01 F-09-01=2 is for USA version only. 0000 ST/WT Decimal ACK Point f-09-02
Acknowledgment of command:
N.A.