A&D Weighing GX-8000 - Manual (Page 85)

83
GX-2000 GX-3000 GX-4000 GX-6100 GX-6000 GX-8000
Weighing capacity 2100 g 3100 g 4100 g 6100 g 6100 g 8100 g
Maximum display 2100.84 g 3100.84 g 4100.84 g 6100.84 g 6108.4 g 8108.4 g
Minimum weighing value (1 digit) 0.01 g 0.1 g
Repeatability (Standard deviation) 0.01 g 0.1 g
Linearity ±0.02 g ±0.03 g ±0.1 g
Stabilization time (typical at FAST)
Approx. 1 second
Approx.
1.5 s
Approx. 1 second
±2 ppm/°C ±5 ppm/°C Sensitivity drift
(10°C-30°C/50
°F-86°F )
(When automatic self calibration is not used)
±0.10 g ±0.15 g ±0.5 g Accuracy right after calibration using
the internal mass. See notes below
The value above is to the weighing capacity.
Operating environment 5°C to 40°C (41°F to 104°F)
85%RH or less (No condensation)
Display refresh rate 5 times/second or 10 times/second
Minimum unit mass 0.01 g 0.1 g Counting
mode
Number of samples 10, 25, 50 or 100 pieces
Minimum 100% reference mass 1.00 g 10.0 g Percent
mode
Minimum 100% display 0.01%, 0.1%, 1% (Depends on the reference mass stored.)
External calibration weight 2000 g
1000 g
3000 g
2000 g
1000 g
4000 g
3000 g
2000 g
4000 g
3000 g
2000 g
6000 g
5000 g
4000 g
3000 g
2000 g
8000 g
7000 g
6000 g
5000 g
4000 g
3000 g
2000 g
Weighing pan 165 x 165 mm
Net weight Approx. 5.1 kg
External dimensions 210 (W) x 317 (D) x 86 (H) mm
AC adapter Confirm that the adapter type is correct for the local voltage and power
receptacle type
Power consumption Approx. 11VA (supplied to the AC adapter)
Interface (Provided as standard) RS-232C with Windows Communication Tools WinCT
Notes
Accuracy right after calibration using the internal mass in good ambient conditions (within
the temperature range of 10 °C to 30°C (50°F to 86°F) with no abrupt changes in temperature
or humidity, no drafts, no effect by magnetic fields or static electricity).
The internal mass has a mass of approximately 500 grams.
Check the internal mass periodically as described in “19. MAINTENANCE”.