A&D Weighing GX-8000 - Manual (Page 84)

82
21. SPECIFICATIONS
GX-200 GX-300 GX-400 GX-600 GX-800 GX-1000
Weighing capacity 210 g 310 g 410 g 610 g 810 g 1100 g
Maximum display 210.084 g 310.084 g 410.084 g 610.084 g 810.084 g 1100.084 g
Minimum weighing value (1 digit) 0.001 g
Repeatability (Standard deviation) 0.001 g
Linearity ±0.002 g ±0.003 g
Stabilization time (typical at FAST) Approx. 1 second Approx. 1.5 seconds
Sensitivity drift
(10°C-30°C/50
°F-86°F )
±2 ppm/°C (When automatic self calibration is not used)
±0.010 g Accuracy right after calibration using
the internal mass. See notes below
The value above is to the weighing capacity.
Operating environment 5°C to 40°C (41°F to 104°F)
85%RH or less (No condensation)
Display refresh rate 5 times/second or 10 times/second
Minimum unit mass 0.001 g Counting
mode
Number of samples 10, 25, 50 or 100 pieces
Minimum 100% reference mass 0.100 g 0.001 g Percent
mode
Minimum 100% display 0.01%, 0.1%, 1% (Depends on the reference mass stored.)
External calibration weight 200 g
100 g
300 g
200 g
100 g
400 g
300 g
200 g
600 g
500 g
400 g
300 g
200 g
800 g
700 g
600 g
500 g
400 g
300 g
200 g
1000 g
900 g
800 g
700 g
600 g
500 g
400 g
300 g
200 g
Weighing pan 128 x 128 mm
Net weight Approx. 4.6 kg
External dimensions 210 (W) x 317 (D) x 86 (H) mm
AC adapter Confirm that the adapter type is correct for the local voltage and power
receptacle type
Power consumption Approx. 11VA (supplied to the AC adapter)
Interface (Provided as standard) RS-232C with Windows Communication Tools WinCT
Notes
Accuracy right after calibration using the internal mass in good ambient conditions (within
the temperature range of 10 °C to 30°C (50°F to 86°F) with no abrupt changes in temperature
or humidity, no drafts, no effect by magnetic fields or static electricity).
The internal mass has a mass of approximately 500 grams.
Check the internal mass periodically as described in “19. MAINTENANCE”.