Kofax INDICIUS 6.0 - Manual (Page 77)

Configuring Recognition
Getting Started Guide (Free-Form) 71
Function DoSearches()
Dim lret
'*** Search: Date ***
lret = Textread.DoSearch ("Date", "TextRead1", "MCAnchor_Date", "MCTarget_Date")
If lret < 0 Then
Recog.LogMessage "TextRead.DoSearch failed for search: Date. Error code:" & lret, 1
DoSearches = lret
Exit Function
End If
'*** Search: AccountNo ***
lret = Textread.DoSearch ("AccountNo", "TextRead1", "MCAnchor_AccountNo", "MCTarget_AccountNo")
If lret < 0 Then
Recog.LogMessage "TextRead.DoSearch failed for search: AccountNo. Error code:" & lret, 1
DoSearches = lret
Exit Function
End If
'*** Search: TransferDate ***
lret = Textread.DoSearch ("TransferDate", "TextRead1", "MCAnchor_TransferDate", "MCTarget_TransferDate")
If lret < 0 Then
Recog.LogMessage "TextRead.DoSearch failed for search: TransferDate. Error code:" & lret, 1
DoSearches = lret
Exit Function
End If
'*** Search: ZipCode ***
lret = Textread.DoSearch ("ZipCode", "TextRead1", "MCAnchor_ZipCode", "MCTarget_ZipCode")
If lret < 0 Then
Recog.LogMessage "TextRead.DoSearch failed for search: ZipCode. Error code:" & lret, 1
DoSearches = lret
Exit Function
End If
End Function
Figure 5-30. DoSearches Function
Analyze the Matches and Output Results
Once the search has been done the number of matches found is retrieved. If a single
match is found this is output as a confident field value. If more than one match is
found the first match is output but is flagged as unconfident so it can be reviewed in
Completion. This behavior can be altered if different rules are required for a solution.
The data is output to new fields, created according to the name of the search.
The code in Figure 5-31 is repeated for each search.