KEYENCE SR-700 Series - Manual (Page 6)

6 E SR-700-IM
Specifications
*1 Barcodes fitted into the visual field range in size can be read.
WARRANTIES AND DISCLAIMERS
(1) KEYENCE warrants the Products to be free of defects in materials and
workmanship for a period of one (1) year from the date of shipment. If any
models or samples were shown to Buyer, such models or samples were used
merely to illustrate the general type and quality of the Products and not to
represent that the Products would necessarily conform to said models or
samples. Any Products found to be defective must be shipped to KEYENCE
with all shipping costs paid by Buyer or offered to KEYENCE for inspection and
examination. Upon examination by KEYENCE, KEYENCE, at its sole option,
will refund the purchase price of, or repair or replace at no charge any Products
found to be defective. This warranty does not apply to any defects resulting
from any action of Buyer, including but not limited to improper installation,
improper interfacing, improper repair, unauthorized modification, misapplication
and mishandling, such as exposure to excessive current, heat, coldness,
moisture, vibration or outdoors air. Components which wear are not warranted.
(2) KEYENCE is pleased to offer suggestions on the use of its various Products.
They are only suggestions, and it is Buyer's responsibility to ascertain the
fitness of the Products for Buyer’s intended use. KEYENCE will not be
responsible for any damages that may result from the use of the Products.
(3) The Products and any samples ("Products/Samples") supplied to Buyer are not
to be used internally in humans, for human transportation, as safety devices or
fail-safe systems, unless their written specifications state otherwise. Should any
Products/Samples be used in such a manner or misused in any way,
KEYENCE assumes no responsibility, and additionally Buyer will indemnify
KEYENCE and hold KEYENCE harmless from any liability or damage
whatsoever arising out of any misuse of the Products/Samples.
(4) OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE
PROVIDED WITH NO OTHER WARRANTIES WHATSOEVER. ALL
EXPRESS, IMPLIED, AND STATUTORY WARRANTIES, INCLUDING,
WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF
PROPRIETARY RIGHTS, ARE EXPRESSLY DISCLAIMED.
IN NO EVENT SHALL KEYENCE AND ITS AFFILIATED ENTITIES BE
LIABLE TO ANY PERSON OR ENTITY FOR ANY DIRECT, INDIRECT,
INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES
(INCLUDING, WITHOUT LIMITATION, ANY DAMAGES RESULTING FROM
LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF INFORMATION,
LOSS OR INACCURACY OF DATA, LOSS OF PROFITS, LOSS OF
SAVINGS, THE COST OF PROCUREMENT OF SUBSTITUTED GOODS,
SERVICES OR TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF
OR IN CONNECTION WITH THE USE OR INABILITY TO USE THE
PRODUCTS, EVEN IF KEYENCE OR ONE OF ITS AFFILIATED ENTITIES
WAS ADVISED OF A POSSIBLE THIRD PARTY’S CLAIM FOR DAMAGES
OR ANY OTHER CLAIM AGAINST BUYER. In some jurisdictions, some of the
foregoing warranty disclaimers or damage limitations may not apply.
BUYER'S TRANSFER OBLIGATIONS:
If the Products/Samples purchased by Buyer are to be resold or delivered to a
third party, Buyer must provide such third party with a copy of this document, all
specifications, manuals, catalogs, leaflets and written information provided to
Buyer pertaining to the Products/Samples.
E 1101-3
Model SR-700HA SR-700 SR-710
Type
High
resolution
Short-range Mid-range
Laser pointer
Light source Visible semiconductor laser (660 nm)
Output 60 μW
Pulse width 200 μs
Laser class
Class 1
(IEC60825-1, FDA CDRH Part 1040.10)
Light Light source High intensity red LED
Reading
Supported
code
2D Code
QR, MicroQR, DataMatrix,
GS1 DataMatrix, PDF417, Micro PDF417,
GS1 Composite (CC-A, CC-B, CC-C)
Barcode *1
Code 39, ITF,
2of5 (Industrial 2of5),
COOP 2of5, NW-7 (Codabar),
Code 128, GS1-128,
GS1 DataBar, Code 93,
JAN/EAN/UPC,
Trioptic Code 39,
CODE39 FullASCII,
Pharmacode
Focal distance 38 mm 60 mm 100 mm
Minimum
resolution 2D Code 0.082 mm 0.127 mm 0.19 mm
Barcode - 0.127 mm 0.127 mm
Reading
distance
(typical
examples)
2D Code
22 to 50 mm
(Cell size=
0.25 mm)
40 to 80 mm
(Cell size=
0.25 mm)
45 to 165 mm
(Cell size=
0.5 mm)
Barcode -
30 to 100 mm
(Narrow bar
width
= 0.33 mm)
45 to 195 mm
(Narrow bar
width
= 0.5 mm)
Reading view range
(focal distance) 26 mm x
17 mm
42 mm x
27 mm
70 mm x
45 mm
Input/output
Control input 2 non-voltage inputs (IN1, IN2)
Control output
4 NPN open collector outputs (OUT1 to OUT4)
30 mA max. (24 V or less)
ON: Residual voltage 0.8 V or less,
OFF: leakage current 0.1 mA or less
RS-232C
Communicati
on method
RS-232C standards
Transmission
speed
9600, 19200, 38400, 57600, 115200 bps
Synchronizati
on method
Asynchronous
Supported
protocol
No-protocol, MC Protocol, SYSWAY, KVSTUDIO
Data bit
length
7/8 bits
Stop bit
length
1/2 bits
Parity check None/Even/Odd
USB Full-speed USB 2.0 interface
Environment
resistance
Enclosure rating IP65
Ambient temperature 0 to +45 ° C
Storage temperature -10 to +50 ° C
Relative humidity 35 to 95% RH (No condensation)
Ambient luminance
Sunlight: 10,000lx, incandescent lamp 6,000lx,
fluorescent lamp: 2,000lx
Operating environment Location without dust or corrosive gas
Vibration
10 to 55 Hz: double amplitude 1.5 mm in the X, Y
and Z directions. 3 hours respectively.
Rating
Power supply voltage 5 VDC +5%, -10%
Current consumption 630 mA or less
Weight Approx. 160 g (including the cable)
Copyright (c) 2014 KEYENCE CORPORATION. All rights reserved.
13107E 1084-1 96M13107 Printed in Japan