Hardy HI 1746-WS - Manual (Page 11)

Chapter 1 - Overview
1-1
CHAPTER 1 - OVERVIEW
A BRIEF
DESCRIPTION OF
CHAPTER 1 This manual provides the user and service personnel
with a description of the specifications, installation,
setup, configuration, operation, communication,
maintenance, and troubleshooting procedures for the
Hardy Process Solutions HI 1746-WS Weigh Scale
Module, designed for use in Allen-Bradley’s SLC 5/
02, 5/03, 5/04, 5/05 programmable controllers. The
HI 1746-WS is equipped with WAVERSAVER
®
, C2
®
Calibration, The Button, and I NTEGRATED T ECHNI -
CIAN (IT) diagnostics. The module is configurable via
Windows
®
95/98/NT HI WS 100 Configuration Soft-
ware or RS Logix 500
©
Industrial Programming Soft-
ware. To get the maximum service life from this
product, users should operate this module in accor-
dance with recommended practices either implied or
expressed in this manual. Before using the Weigh
Scale Module, all users and maintenance personnel
should read and understand all cautions, warnings,
and safety procedures, referenced or explicitly stated
in this manual, to ensure the safe operation of the
module. Hardy Process Solutions appreciates your
business. Should you not understand any information
in this manual or experience any problems with the
product, please contact our Customer Support Depart-
ment at:
Phone: (858) 278-2900
FAX: (858) 278-6700
e-mail: [email protected]
Web Address: http://www.hardysolutions.com
NOTE: WAVERSAVER
®
, C2
®
, I NTEGRATED T ECHNICIAN
®
are
registered trademarks of Hardy Process Solutions Inc.
Windows
®
is a registered trademark of the Microsoft
Corporation. RS Logix 500
©
is a Copyright of Rock-
well Software Inc.
NOTE: Hardy bases all procedures with the assumption that
the user has an adequate understanding of all Allen-
Bradley SLC 500 products. In addition the user