6 cleaning the filter foam mat (b), Rator, Cleaning – FRITSCH PULVERISETTE 19 User Manual
Page 46
7.5 Cleaning the sample exhaust system and cyclone separator
The exhaust system can be disassembled and cleaned after opening the
clips (F). To open and clean the cyclone separator, 4 screws in the inner
part of the base must be loosened.
7.6 Cleaning the filter foam mat (B)
1.
Vacuum the filter foam mat with the dust exhaust system
2.
Subsequently wash it out with water. If necessary, you could use a
tenside for cleaning.
3.
Allow the foam mat to air-dry!
Cleaning
- 46 -