FRITSCH PULVERISETTE 19 - Manual (Page 43)

4. Slowly swivel open the upper part of the housing (2) with the
closing lid (6) fully open, until it is resting on the rubber buffer.
5. Clean the cutting chamber.
7.3 Funnel
Clean the funnels (1, 22) with a dust exhaust system and brush and also
with compressed air, if necessary.
7.3.1 Standard funnel (1)
1. With the cutting chamber open, vacuum out the funnel from
below
2. Clean the funnel from above.
Cleaning
- 43 -