FRITSCH PULVERISETTE 19 - Manual (Page 19)

3.7 Motor shaft power in accordance with VDE 0530, EN 60034
n 2.2 kW for 400V / 3~ motor
n 1.5 kW for 400V / 3~ motor
n 1.5 kW for 230V / 1~ motor
n 1.1 kW for 100-120V / 1~ motor
3.8 Electrical fuses
n Circuit breaker in device
n Micro-fuse in device
n Motor safety switch (Ä Chapter 6.4 ‘Overload of the cutting mill’
on page 37)
n Direction of rotation detection in three-phase model (Ä Chapter 2.8
‘Electrical safety’ on page 17)
3.9 Material
Depending on material and funnel (1, 22) up to 70 x 80 mm. Harder
material max. 10 mm.
Batchwise feeding!
Depending on material property and sieve used, up to 60 l/h.
3.10 Final fineness
Achievable average final fineness depending on sieve insert, 0.2 - 6 mm.
3.11 Speed
50 Hz 60 Hz Order No.:
302 - 1168 rpm/min 19.108x.00
2800 - 3400 rpm/min 19.10x0.00
Feed size
Throughput
Technical data
- 19 -