FRITSCH PULVERISETTE 19 - Manual (Page 10)

2.2.1 Operating principle
The material is fed through a funnel (example in image with standard
funnel) into the cutting chamber. There, rotating knives (3) in combina-
tion with fixed knives (4,5,9) cut the material. The fine ground material
falls through a sieve cassette (7) into the collecting vessel (8).
For fine comminution, the sample exhaust system can be used with
cyclone separator (optional accessory 45.5900.00).
2.3 Obligations of the operator
Before using the PULVERISETTE 19, this manual is to be carefully read
and understood. The use of the PULVERISETTE 19 requires technical
knowledge; only commercial use is permitted.
The operating personnel must be familiar with the content of the oper-
ating manual. For this reason, it is very important that these persons
actually receive the present operating manual. Ensure that the operating
manual is always near the device.
The PULVERISETTE 19 may exclusively be used within the scope of appli-
cations set down in this manual and within the framework of guidelines
put forth in this manual. In case of non-compliance or improper use, the
customer assumes full liability for the functional capability of the PUL-
VERISETTE 19 and for any damage or injury arising from failure to fulfil
this obligation.
By using the PULVERISETTE 19 the customer agrees with this and recog-
nizes that defects, malfunctions or errors cannot be completely
excluded. To prevent risk of damage to persons or property or of other
direct or indirect damage, resulting from this or other causes, the cus-
tomer must implement sufficient and comprehensive safety measures
for working with the PULVERISETTE 19.
Neither compliance with this manual nor the conditions and methods
used during installation, operation, use and maintenance of the PUL-
VERISETTE 19 can be monitored by Fritsch GmbH. Improper execution of
the installation can result in property damage and thus endanger per-
sons. Therefore, we assume absolutely no responsibility or liability for
loss, damage or costs that result from errors at installation, improper
operation or improper use or improper maintenance or are in any way
connected to these.
Safety information and use
- 10 -