FRITSCH PULVERISETTE 19 - Manual (Page 20)

4 Installation
4.1 Transport
n Transport on transport palette with a forklift or pallet truck.
n When lifting the device hold it underneath at the back and front
only. Do not lift it using the plastic cover.
CAUTION!
When lifting, at least 2 persons are required!
4.2 Unpacking
n Pull out the nails that fasten the crate to the transport pallet.
n Lift the crate off the transport pallet.
n Compare the contents of the delivery with your order.
4.3 Setting up
n 4 screws connect the cutting mill to the transport pallet.
Remove the 4 screws.
n Lift the cutting mill off the transport pallet.
CAUTION!
At least 2 persons are required to lift it off!
4.4 Ambient conditions
n The device may only be operated indoors.
n The surrounding air may not carry any electrically conductive dust.
n The room temperature should be between 5 and 40 °C.
n Altitudes up to 2000 m NN.
n Maximum relative humidity 80% for temperatures up to 31 °C, line-
arly decreasing down to 50% relative humidity at 40 °C.
n Degree of pollution 2 according to IEC 664.
Installation
- 20 -