FRITSCH PULVERISETTE 7 premium line - Manual (Page 76)

1. Insert the seal in the bowl!
2. Insert the intermediate lid!
NOTICE!
Always insert the intermediate lid before grinding
with the EasyGTM system! Fritsch assumes no guar-
antee for damage caused by grinding without the
intermediate lid!
3. Apply the transmitter with seal!
4. Tighten the socket-head screws crosswise with a torque spanner
(1) until it disengages! To be on the safe side, re-tighten all screws
again after initially tightening them. All screws are secured against
becoming loose during the grinding process once they have been
tightened with the torque spanner as described.
Fritsch GmbH assumes no guarantee for damage
caused by grinding with loose screws!
Accessories
- 76 -