FRITSCH PULVERISETTE 7 premium line - Manual (Page 21)

Grinding bowls made of tempered steel may have recesses
on the surface caused during production. They do not have
an impact on grinding or the grinding results and usually
disappear after the first grinding operation.
These recesses on the surface, if present, are within the
range of the permissible production tolerances. Complaints
relating to such grinding bowls therefore cannot be
accepted.
3.3 Setting up
n Set up the planetary micro mill indoors, on a flat and firm surface.
NOTICE!
Never operate the PULVERISETTE 7 premium line while it is
standing on the transport pallet!
n Make sure that:
– all switches / control elements are easy to access;
– the ventilation slots are not covered;
– the interfaces (USB / Ethernet) are easy to access.
CAUTION!
Risk of overheating!
The cover on the housing openings may reduce the supply
of air, thus causing the device to overheat.
n Please store the transport packaging in order that it can be reused in
case you need to return the product. Fritsch GmbH denies all liability
for any damage due to improper packaging (non-genuine packaging).
Installation
- 21 -