Safety information and use – FRITSCH PULVERISETTE 7 premium line User Manual

Page 14

DANGER!
Explosion hazard!
– Wear safety goggles. The high temperature or chemical

reactions during the grinding process may result in

overpressure in the grinding bowl. Splashing hazard!

– Never use brute force to open the grinding bowl. Open

the grinding bowl only if you are sure that the internal

pressure has been released completely. Observe the

– The device may only be operated indoors. The sur-

rounding air must not contain any electrically conduc-

tive dust.

– When grinding oxidisable substances (e.g. metal or

coal), there is a risk of spontaneous combustion (dust

explosion) if the proportion of fine particles exceeds a

certain percentage. Chemical reactions are also pos-

sible during wet grinding. When grinding these kinds of

substances, special safety measures (e.g. wet grinding)

must be taken and the work must be supervised by a

specialist.

– The device is not explosion-protected and is not suit-

able for grinding explosive materials.

DANGER!
– Do not reuse damaged accessories.
– If the planetary micro mill or its components are dam-

aged or if its operation is not as described in the oper-

ating manual, the device may not be put into service. In

such a case, consult your Fritsch GmbH representative

or distributor.

WARNING!
The maximum accepted concentration (MAC) levels of the

valid safety regulations must be observed. If necessary,

ventilation must be provided or the machine must be oper-

ated under an extractor hood.

Safety information and use

- 14 -