FRITSCH PULVERISETTE 7 premium line - Manual (Page 42)

5.9.3 Closing the grinding bowl
1. Insert the flat seal (3) in such a way that the recess is near a
locking hook (4).
2. Push the locking hooks (4) inwards completely at the top end and
place the lid (2) on the bowl (1).
3. The lid (2) is now lying on the small lug (a) of the locking hook (4)
on the edge of the bowl.
4. Turn the lid (2) on the bowl until the small lugs (a) of the locking
hooks (4) engage in the recesses on the edge of the bowl.
Attention!
(a) Lug
Using the device
- 42 -