FRITSCH PULVERISETTE 7 premium line - Manual (Page 71)

6.3 EASY GTM Gas Pressure and Temperature Measuring System
The EASY GTM gas pressure and temperature measuring system is used
to control the grinding process and for mechanical alloying.
NOTICE!
If grinding balls with a diameter of 1 mm are used, there is
a risk of the clearance holes of the lid getting clogged,
which could falsify the pressure and temperature measure-
ment. Grinding balls with a diameter of up to 0.8 mm or
grinding balls with a diameter of 1.2 mm or greater can be
used without any problem.
6.3.1 Case contents and system design
1 2.6 Nm torque spanner + hexagonal bit
2 2x battery, 1.5 V, AA
3 EASY GTM system
4 Flat sealing ring, 54x2, silicone foam
5 O-ring, 21x2.5
6 Hexagon screwdriver, 3mm
7 Hexagon offset screwdriver, 2.5mm
8 Measuring/transmission unit
9 Lid
10 Compl. bowl
11 locking ring with 6 socket head screws
Accessories
- 71 -