FRITSCH PULVERISETTE 7 premium line - Manual (Page 68)

5. Turn the lid (2) with the hooks pressed outwards on the bowl, until
the lugs of the hooks engage in the recesses on the edge of the
bowl fitting (Ä Chapter 5.9.3 ‘Closing the grinding bowl’
on page 42). After releasing the hooks, they must be immersed
completely in the recesses on the outer diameter of the bowl fit-
ting and be exactly vertical.
6. Push the central handle (1) down by hand until the resistance
increases. Use the hexagon socket wrench (10) to tighten it with
maximum manual force. The maximum manual force is equivalent
to a torque of approx. 3.5-4Nm.
7. This is what the closed grinding bowl looks like.
Accessories
- 68 -