Checkline DFX-7 - Manual (Page 56)

Dakota Ultrasonics
52
Activating & Setting the Parameters
Activate Trig Mode
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the TRIG menu is highlighted and displaying the submenu items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until TRIG is highlighted.
3) Press the LEFT and RIGHT arrow keys to toggle the TRIG feature ON. The
menu items should now become active and adjustable, as illustrated above.
Enter Material Thickness
1) Press the UP and DOWN arrow keys until THICKNESS is highlighted,
followed by pressing the LEFT and RIGHT arrow keys to scroll the value.
When the correct thickness is displayed, proceed to the next setting.
2) Alternatively, press the ENTER key to display the Digits Edit Box.
3) Press the UP and DOWN arrow keys to scroll the highlighted value.