Brookfield YR-1 Rheometer - Manual (Page 53)

Brookfield Engineering Labs., Inc. Page 53 Manual No. M02-215-B0412
Analog Output:
The analog outputs for temperature and % torque are accessed from the 9-pin connector located
on the rear panel of the YR-1. The pin connections are shown in Figure E-1. The output cable
(Part No. DVP-96Y) connections are:
Red Wire: Temperature Output
Black Wire: Temperature Ground
White Wire: % Torque Output
Green Wire: % Torque Ground Note:
Please contact Brookfield Engineering Laboratories or your local dealer/distributor for purchase
of the DVP-96Y analog output cable.
See Appendix D to perform the appropriate calculations using the data acquired during a test.