Aviom 6416o - Manual (Page 37)

28 F
roNt
P
ANel
F
eAtures
between the options. When a new configuration is selected, the selected
Port LED and the Enter/Cancel LED will blink; confirmation is required. Press
E
ntEr
to set a new receive port or press C
anCEl
to exit without making a
change and return to the previous setting.
Changing the port receive settings in Manual Mode has no effect on the
current channel on/off settings.
Clock Master
One device in a Pro64 network will always be set as the network’s Clock
Master. In a network with only analog I/O modules, the module set as the
Control Master is also set to be the Clock Master by default. The Module set
as the Clock Master will have its Clock Master LED lit.
When digital I/O modules are used in a network, incoming word clock or AES3
(also referred to as AES/EBU) digital data streams can also be clock sources. It
is only when a digital module is part of the network that the Control Master
and Clock Master can be separate devices.
Only one Pro64 device can be set as the Clock Master. Its yellow LED will be lit.