360 Systems TCR Multi-Track - Manual (Page 95)

TCR Series User's Guide Machine Setup 5-11
Audio I/O
MENU | Machine Setup | Audio I/O
The Setup Audio I/O (Input/Output) Menu provides setup and maintenance functions that allow you
to customize and calibrate the audio performance of the TCR. To reach the Setup Audio I/O Menu,
select item 1 (AUDIO I/O) on the Setup Menu.
SETUP AUDIO I/O
0. TRACK INPUT 1-2 : ANALOG 1-2
1. TRACK INPUT 3-4 : ANALOG 3-4
2. TRACK INPUT 5-6 : ANALOG 5-6
3. TRACK INPUT 7-8 : ANALOG 7-8
4. SRC INPUT : AES 1-2 DIRECT
5. MON ARMED TRACKS : WHEN RECORDING
6. OUTPUT WORD SIZE : 24 BITS
7. HEADROOM : 20 DB
8. > CALIBRATE OUTPUTS
9. CALIBRATE INPUTS
*. SET PROCESS DELAYS
Setup Audio I/O Menu (as shown for the TCR8)
Note that the TCR4’s Setup Audio I/O Status Menu lists tracks 1 - 4 only.
The functions in the Setup Audio I/O Menu are listed below. Note that the function numbers differ
for TCR4 and TCR8 systems.
•
Track Input Selection
Selects the audio input source for each track pair. Choose Analog, Digital, or Sample Rate
Converter.
•
Sample Rate Converter Input
Select which digital input feeds the sample rate converter, and whether conversion is enabled
or bypassed.
•
Mon Armed Tracks
Selects when the inputs to armed tracks are monitored. Choose only When Recording, or
any time When Not Playing (for example, stopped or recording).
•
Output Word Size
Select dithered word size for digital outputs. Choose 24, 20 or 16 bit word size.
•
Headroom
Select headroom for +4dbU inputs. Choose –20dBFS or -16dBFS.
•
Calibrate Outputs
Trims output levels for uniform output.
•
Calibrate Inputs
Trims input levels for uniform input.